Top 8 Tips and Tricks for 3D design
In this article, as part of our education series, we provided a lot of tip and tricks to help you improve your design skills especially for 3d printing.
Tip 1: Make sure there is an inner chamfer whenever you create an outer one.
Tip 2: Make sure bottom or base has a slight chamfer.
Tip 3: Maximum overhang angle shouldn’t exceed 60.
Tip 4: Make sure there is a flat surface.
Tip 5: Make sure holes are chamfered.
Tip 6: Avoid low resolutions when exporting 3d models.
Tip 7: Avoid thin walls ( minimum thickness should be 1mm ).
Tip 8: Avoid sharp corners.
